BACK

MP551 pH / mV / ISE / Konduktivitas / DO Meter

Brand:NANBEI

Model:MP551

Application:

CONTACT NOW Chat Now

product details

Introduction

● Meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.

● There are three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.

●Automatically recognize 13 kinds of pH buffer solution. User can choose anyone from four series of standard buffer solutions: Europe & USA series, NIST series, CHINA series and Self-defined series.

●High purified water and ammonia added purified water pH measuring mode can be set up, especially suitable for electric power and petrochemical industry

● With EH redox potential measuring mode can directly display ORP value which against standard potential of hydrogen electrode.

● Automatically recognize 8 kinds of conductivity standard solution. User can choose anyone from two series of solutions: Europe & USA series and China series.

● Adopt advanced and original conductivity measurement technology, use 1 pc of conductivity electrode (K=1), it can meet measuring accuracy requirement for range within 0.5μS/cm ~ 200mS/cm by using only one-point calibration.

● Automatically select conductivity measurement range, when measuring high pure water, equipment automatically enter into temperature compensation of nonlinear model, especially for electricity, microelectronics and the pharmaceutical industry requirements.

● Equips new type of DO electrode which has function of automatic temperature compensation and automatic salinity compensation as well as automatic air pressure compensation inside meter to make DO measuring mode has temperature, air pressure and salinity automatic compensation, easy to use, accurate to measure.

● Polarogram type DO electrode has special electrode calibration cap. Only needs 3 to 5 minutes for electrode polarization. Electrode adopts combination diaphragm cap which very convenient to use. Each DO electrode equips with three spare diaphragms caps.

●There are 10 kinds of common ions can be selected in the ion concentration measuring mode, user also can self-define other ions.

●Can switch 4 kinds of concentration unit : pX, mol/L, mg/L and ppm

● Meter has the only product serial number.

●Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.

Specifications

pH	Measuring range Resolution Accuracy Input current Input impendance Stability Temp. compensation range	（-1.999 ~ 19.999）pH 0.1/0.01/0.001 pH Meter:±0.002 pH, connect meter with electrode:±0.01pH ≤1×10-12 A ≥3×1012 Ω ±0.002 pH/3h (0 to 100) ℃（automatic or manual）
mV	Measuring range(mV/ORP/EH) Resolution Accuracy	-1999.9mV ~ 0 ~ 1999.9mV 0.1mV ±0.03% FS
Ion Concentration	Measuring range Display unit Accuracy Temp. compensation range	0.00 ~ 14.00 pX pX、mol/L、mg/L、ppm Meter:±0.5 % reading(monovalent), ±1.0 % reading (bivalent) 0 to 60 ℃（automatic or manual）
Conductivity	Measuring range Resolution Accuracy Temp. compensation range Electrode constant Reference temperature	Conductivity：（0.00~20.00）μS/cm （20.0~200.0）μS/cm （200~2000）μS/cm （2.00~20.00）mS/cm （20.0~200.0）mS/cm （200~2000）mS/cm（K=10） Resistivity：（0 ~ 100）MΩ·cm TDS: （0 ~ 100）g/L Salinity：（0 ~ 100）ppt 0.01/0.1/1μS/cm 0.01/0.1/1 mS/cm Meter:±0.5% FS,connect meter with electrode:±0.80% FS （0 ~ 50）℃（automatic ） 0.1 / 0.5 / 1 / 5 / 10 / 50 / 100 cm-1 25℃、20℃ and 18℃
Dissolved Oxygen	Measuring range Resolution Accuracy Response time Residual current Temp. compensation range Salinity compensation range Air pressure compensation Automatic calibration Electrode type	（0 ~ 40.00）mg/L(ppm) （0 ~ 200.0）% 0.1/0.01 mg/L(ppm) 1/0.1 % Meter：±0.10 mg/L，connect meter with electrode：±0.40 mg/L ≤30 s（25℃, 90% response） ≤0.1 mg/L （0 ~ 45）℃（automatic）（0 ~ 45）ppt（automatic）（80 ~ 105）kPa（automatic） Air saturated by water; water saturated by air Polarogram type
Temperature	Measuring range Resolution Accuracy	-10℃~ 110℃ 0.1℃ 5~ 60℃range：±0.4℃ other range：±0.8℃
Other Technical Parameters:	Data storage Storage content Power Communication connector Size and weight Quality and safety certification	300 groups Measuring value series number, measuring value, temperature, ATC or MTC state, measuring date and time DC9V/300mA RS232 160 × 190 × 70mm/880g ISO9001:2008, CE and CMC
Working Condition	Environment temperature Environmental humidity IP rating	5 ~ 35 ℃（0.01grade） 15 ~ 30 ℃（0.001grade） ≤75% IP54 Dustproof and waterproof

Standard Kit Includes

1. Model MP551 pH/mV/ISE/Cond/DO meter	1set
2. Model 602 flexible electrode holder	1pc
3. Model 901 intelligent stirrer	1set
4. 201T-M plastic pH/ATC three-in-one combination electrode	1pc
5. 2503-C glass pH combination electrode	1pc
6. MP500 temperature electrode	1pc
7. 2401-M conductivity electrode	1pc
8. DO500 DO electrode	1pc
9. Model 6213 double salt bridge reference electrode	1pc
10. pH standard buffer solution（pH4.00、pH6.86、pH9.18/50ml）	1btl/each
11. 1413μS/cm conductivity standard solution (50 mL)	2btls
12. 9V power adapter (meter use)	1pc
13. 6V power adapter (stirrer use)	1pc
14. DO503 membrane cap (DO electrode use)	3pc
15. DO502 DO electrode inner solution (30 mL)	1btl
16. Cathode polishing paper	2pcs
17. B628 stirring bead	3pcs
18. AA battery	4units
19. RS-232 communication cable	1pc
20. MP551 communication software disk	1pc
21. Operation manual	1unit
22. Brief operation instruction	1unit
23. Packing List	1pc